Camera super clamps can turn a desk, light stand, shelf, or other sturdy surface into a practical mounting point for interview gear. The right model helps position cameras, monitors, lights, microphones, and accessories without adding a full tripod or stand.
We selected 10 versatile options ranging from compact single clamps to multi-pack kits and articulated magic-arm designs. Use the guide below to match clamp strength, mounting hardware, adjustment flexibility, and portability to your interview workflow.
Best 10 Camera Super Clamps for Interviews Picks for 2026
Best Adjustable Pick
ULANZI 360° Ballhead Super Clamp
- 360° ballhead for flexible positioning
- 60mm jaw opening and 1.5kg recommended load
- Includes 1/4", 3/8", and action-camera mounting options
Best For: Compact interview rigs needing adjustable accessory placement
Best Heavy-Duty Pick
- Supports up to 15kg
- Clamps round or flat surfaces
- Includes 5/8-inch stud and multiple mounting points
Best For: Heavier interview cameras and studio lighting
Best Two-Pack Value
- Includes two versatile clamps
- Fits 15mm–40mm rods
- Offers 1/4-inch and 3/8-inch threads
Best For: Multi-accessory interview rigs
Best Compact Ballhead
- 360° rotating mini ballhead
- 3kg maximum load
- Multiple 1/4-inch and 3/8-inch thread holes
Best For: Small interview rigs with limited mounting space
Flexible Dual-Clamp Setup
NEEWER UA036 Double Super Clamp
- Dual clamps and 360-degree ball heads
- Two cold shoes plus 1/4-inch and ARRI points
- Supports up to 3.5kg
Best For: Interview rigs needing multiple accessory positions
Compact Mounting Essential
- Clamps onto supports from 15mm to 40mm
- 1/4-inch and 3/8-inch threaded holes
- Rubber pads protect against slipping and scratches
Best For: Simple, lightweight interview mounting setups
Articulated Interview Mount
- 3-inch magic arm with dual 360-degree ballheads
- Clamps onto 14-to-60mm supports
- Cold shoe, 1/4-inch thread, and ARRI points
Best For: Adjustable camera and accessory positioning
Best Compact Interview Rig
- 360-degree articulating ball head
- 15–40 mm padded jaw range
- For compact cameras and accessories
Best For: Vloggers and compact interview setups
Best Multi-Point Value
- Four clamps in one pack
- 1/4-inch and 3/8-inch threads
- 12–54 mm adjustable jaw range
Best For: Lightweight multi-accessory interview rigs
Best Heavy-Duty Flexibility
- 60 mm opening and 3 kg capacity
- Dual 360-degree rotation
- Multiple 1/4-inch and Arri interfaces
Best For: Flexible camera, monitor, and lighting setups
Best Adjustable Pick – ULANZI 360° Ballhead Super Clamp
For camera super clamps for interviews, the ULANZI model offers flexible positioning for a camera, monitor, light, or microphone. Its 360° ballhead, 60mm maximum jaw opening, and 1.5kg recommended load make it useful for compact interview rigs, rods, and shoulder setups.
Best For: Interview shooters who need adjustable positioning for a monitor or small accessory.
Pros:
- 360° adjustable ballhead helps position mounted gear during shooting.
- Supports rods, plates, shoulder rigs, and handles up to a 60mm opening.
- Includes 1/4″ and 3/8″ female threads plus an action-camera adapter.
- Aluminum construction and rubber padding help protect clamped surfaces.
Cons:
- The recommended load is limited to 1.5kg.
- It is not water resistant.
This is a versatile choice for lightweight interview accessories, particularly when quick angle adjustments matter more than heavy-duty load capacity.
Best Heavy-Duty Pick – NEEWER UA017 Super Clamp
Among camera super clamps for interviews, the NEEWER UA017 stands out for high load capacity and secure mounting. Its 6cm jaw grips round surfaces or flat desks, while the included 5/8-inch stud supports compatible lights and studio equipment.
Best For: Interview setups using heavier cameras, lights, strobes, or studio accessories.
Pros:
- Supports equipment loads up to 15kg.
- Works on round items from 0.5cm to 6cm and flat surfaces up to 4cm thick.
- Long lever and spring-lock 5/8-inch stud simplify mounting.
- Includes a 1/4-inch thread and M5 connection options for expanded rigs.
Cons:
- At 637g, it is relatively heavy for a compact clamp.
- The 5/8-inch stud may require compatible receivers or additional adapters.
- It is not water resistant.
The UA017 is a strong fit when stability and load capacity are priorities, though its heavier build is less suited to ultra-light travel kits.
Best Two-Pack Value – SMALLRIG 2058 Super Clamps
The SMALLRIG 2058 two-pack is a practical option for camera super clamps for interviews when you need to mount more than one accessory. Each clamp supports 15mm–40mm rods and includes 1/4-inch and 3/8-inch threads for cameras, monitors, lights, and related rig components.
Best For: Multi-accessory interview rigs and setups that benefit from two matching clamps.
Pros:
- Two clamps provide useful flexibility for mounting separate accessories.
- Compatible with 15mm–40mm rods.
- 1/4-inch and 3/8-inch threads support a range of attachments.
- Rubber interiors help reduce scratches and slipping.
Cons:
- The supplied notes do not specify a maximum load.
- Additional arms or adapters may be needed for some equipment.
For interview crews building modular rigs, the two-pack offers convenient mounting coverage and broad compatibility without committing to a single large clamp.
Best Compact Ballhead – CAMVATE Mini Ball Head Clamp
For compact camera super clamps for interviews, the CAMVATE combines a 54mm jaw with a rotating mini ballhead. Its multiple thread holes and 3kg maximum load support small cameras, monitors, flashlights, and LCD devices in space-limited setups.
Best For: Small interview rigs requiring a compact clamp and adjustable camera or monitor angle.
Pros:
- 360° mini ballhead allows flexible positioning.
- Supports up to 3kg according to the supplied specifications.
- Includes three 1/4-inch thread holes and one 3/8-inch thread hole.
- 54mm maximum jaw opening suits many compact mounting points.
Cons:
- Its compact design may be less suitable for larger equipment.
- The supplied notes do not mention protective clamp padding.
- It is not water resistant.
The CAMVATE is a space-efficient choice for lightweight interview accessories, especially when several thread positions and angle adjustment are useful.
Flexible Dual-Clamp Setup – NEEWER UA036 Double Super Clamp
For camera super clamps for interviews, the NEEWER UA036 is a flexible option when you need to mount more than one accessory around a desk, stand, pole, or other support. Its fixed magic-arm-and-double-clamp design provides broad positioning range while keeping the setup relatively light.
Best For: Interview rigs that need flexible placement for cameras, lights, microphones, or monitors.
Pros:
- Double super clamps grip surfaces and tubular supports from 14 to 60mm.
- Dual 360-degree ball heads allow adjustable shooting angles.
- Offers 1/4-inch threads, ARRI locating holes, and two cold shoes for accessories.
- Aluminum-alloy and stainless-steel construction supports up to 3.5kg.
Cons:
- The magic arm and clamps are fixed together as one unit.
- A phone holder is not included.
- Its wider dual-clamp design may be more than needed for a simple single-accessory setup.
The UA036 stands out when an interview setup benefits from multiple mounting points and broad angle adjustment. Its 3.5kg payload rating is useful for heavier accessories, but the integrated design is less modular than a separate clamp and arm.
Compact Mounting Essential – SMALLRIG Super Clamp 735
The SMALLRIG Super Clamp is a straightforward choice for camera super clamps for interviews when you want to attach a camera, light, umbrella, or other accessory to a compact support point. Its adjustable jaw and threaded mounting holes suit simple desk, shelf, crossbar, or plate-glass setups.
Best For: Compact interview setups using a single clamp and separately selected mounting accessories.
Pros:
- Adjustable jaw opens from 15mm to approximately 40mm.
- Includes both 1/4-inch and 3/8-inch threaded holes.
- Rubber pads help reduce slipping and scratching.
- Aluminum-alloy and stainless-steel construction is sturdy and durable.
Cons:
- It is a clamp only and does not include a magic arm or ballhead.
- The maximum recommended load is 3.3 pounds.
- Its jaw range is narrower than models that grip supports up to 60mm.
This SMALLRIG model is best viewed as a dependable foundation rather than a complete articulated mount. Pair it with a compatible ballhead or magic arm when you need to position a camera or microphone precisely during an interview.
Articulated Interview Mount – NEEWER ST83 Super Clamp
The NEEWER ST83 is designed for camera super clamps for interviews where angle control matters. Its 3-inch magic arm, dual ballheads, cold shoe, and broad 14-to-60mm clamping range make it suitable for positioning a camera, action camera, microphone, monitor, or LED light on a desk, pole, stand, or rig.
Best For: Interview creators who need a compact clamp with built-in articulated positioning and accessory mounting.
Pros:
- Dual 360-degree ballheads provide flexible angle adjustment.
- Clamps onto flat surfaces and round poles from 14 to 60mm.
- Includes a 1/4-inch thread, ARRI locating points, and a cold shoe.
- Aluminum-alloy and stainless-steel construction supports up to 3kg.
Cons:
- It is not suitable for on-camera speedlite flashes.
- A separate phone or camera adapter may be needed depending on the device.
- Its 3kg payload is lower than the UA036’s 3.5kg rating.
The ST83 offers a useful balance of portability and adjustability for interview work. It is especially practical when you want an integrated magic arm and cold shoe without moving up to a larger dual-clamp assembly.
Best Compact Interview Rig – SMALLRIG Super Clamp
For camera super clamps for interviews, the SMALLRIG Super Clamp is a compact option for mounting a small camera, monitor, microphone, or light to a desk, tube, shelf, or other support. Its adjustable, rubber-padded jaw and 360-degree ball head make it useful when you need a flexible shooting angle without a full stand.
Best For: Vloggers, YouTubers, and interview setups using compact cameras, action cameras, microphones, monitors, or lights weighing within the listed capacity.
Pros:
- Supports gear with a bottom 1/4-inch thread and includes a hot-shoe-style mounting option.
- 360-degree articulation helps position interview accessories at the desired angle.
- Adjustable 15–40 mm jaw with protective rubber padding helps grip surfaces without scratching them.
- Aluminum alloy and stainless steel construction is designed for durable use.
Cons:
- The clamp is intended for relatively light gear, with a listed maximum recommendation of 3 kg.
- Its compact jaw range may not fit larger rails or supports.
This is a practical choice when portability and angle adjustment matter more than heavy-duty capacity. Confirm that your support falls within the 15–40 mm jaw range and that your equipment has a compatible thread or shoe connection.
Best Multi-Point Value – QYXINC 4-Pack Super Clamps
If you need several camera super clamps for interviews, this QYXINC four-pack provides multiple mounting points for cameras, lights, monitors, rods, shelves, hooks, and crossbars. Each clamp includes both 1/4-inch and 3/8-inch threaded holes for broader accessory compatibility.
Best For: Multi-camera or multi-accessory interview rigs where several lightweight clamps are more useful than one articulated mount.
Pros:
- Four clamps are included for mounting accessories in multiple locations.
- 1/4-inch and 3/8-inch threaded holes support a range of compatible accessories.
- Adjustable jaws cover supports from 12 to 54 mm.
- Aluminum alloy, stainless steel, and non-slip rubber pads provide a durable, scratch-conscious grip.
Cons:
- The listed maximum weight recommendation is only 120 g, limiting use to lightweight equipment.
- No articulating arm or ball head is included for direct angle adjustment.
This pack makes sense for lightweight interview accessories and larger productions needing several attachment points. Plan to add suitable arms or adapters if you need independent camera or microphone angle adjustment.
Best Heavy-Duty Flexibility – K&F CONCEPT Camera Clamp
For demanding camera super clamps for interviews, the K&F CONCEPT model combines a 60 mm opening with a stated 3 kg capacity and a dual 360-degree mounting design. Multiple 1/4-inch threads, Arri positioning holes, and included phone and GoPro adapters make it suited to varied camera, monitor, microphone, and lighting configurations.
Best For: Interview creators who need a wider clamp opening, stronger listed load capacity, and flexible mounting options for multiple device types.
Pros:
- 60 mm maximum opening accommodates a broad range of railings, tabletops, lamp holders, tubes, and branches.
- Listed 3 kg capacity supports cameras and other heavier accessories within the stated limit.
- Dual 360-degree rotation provides flexible shooting angles.
- Ten 1/4-inch threaded holes, Arri positioning holes, and included phone and GoPro adapters expand mounting options.
Cons:
- The head cannot be removed to convert the unit into a dual-ball-head arm.
- At 235 g, it is heavier than a basic single clamp.
This is the most versatile option of the three for interview setups that require a wide grip and several mounting possibilities. Its separate design can be used individually or combined, but check the exact configuration needed before purchase.
How We Picked the Best Camera Super Clamps for Interviews
We compared these clamps by the features that matter most in real interview setups: jaw capacity, grip design, load-support hardware, thread standards, ball-head or magic-arm adjustment, and overall versatility. We also considered whether each model is better suited to cameras, monitors, LED lights, action cameras, umbrellas, or lighter accessories.
A clamp must attach securely to a suitable surface before any equipment is mounted. Product specifications and included accessories can vary, so confirm the stated capacity, jaw range, and thread configuration before buying.
Quick Comparison
| Best For | Look For | Useful Features |
|---|---|---|
| Camera or monitor positioning | Strong jaw and adjustable arm | 1/4-20 and 3/8-16 threads, ball head |
| Lights and small accessories | Compact clamp with standard mounting points | Cold shoe, mini ball head, or 5/8-inch stud |
| Multiple interview stations | Two-pack or four-pack value | Consistent hardware across several positions |
| Flexible rigging | Dual-ball or articulated magic arm | Independent angle adjustment and locking knobs |
Key Buying Factors for Camera Super Clamps for Interviews
Jaw Size and Surface Compatibility
Check the maximum opening and the shape of the jaws. Larger jaws can grip thicker desks, poles, shelves, and crossbars, while padded contact points help protect finished surfaces. Avoid relying on a clamp attached to a thin, unstable, or easily flexed surface.
Mounting Threads and Included Hardware
The most useful combinations include 1/4-20 and 3/8-16 threads, since these fit many cameras, monitors, lights, and accessory arms. A 5/8-inch stud is helpful for light-mounted equipment, while cold shoes are convenient for compatible microphones, lights, or receivers.
Adjustment and Locking Control
Ball heads and magic arms make it easier to frame a camera or aim a light around an interview subject. Look for strong locking knobs and enough arm length for your intended position. More adjustment is not always better if the arm adds unnecessary leverage or weight.
Load, Stability, and Safety
Match the clamp to the complete mounted load, not just the camera body. A camera, lens, monitor, microphone, and arm can quickly become heavier than expected. Tighten every joint, keep the load close to the attachment point when possible, and use a safety tether for valuable equipment.
Who Should Buy Which Camera Super Clamps for Interviews?
Choose a compact mini-ball-head clamp if you need a lightweight mount for an action camera, small monitor, microphone receiver, or fill light. A standard single super clamp with 1/4-20 and 3/8-16 compatibility is the better all-purpose choice for most interview kits.
Buy a magic-arm or dual-ballhead model when you need precise camera, monitor, or light positioning. Models with a 5/8-inch stud are especially useful for lighting accessories. If you regularly build several interview stations or mount multiple accessories, a two-pack or four-pack can provide better value and consistent hardware.
For heavier cameras or extended arms, prioritize the strongest compatible clamp and use a separate support or tether rather than depending on maximum advertised capacity alone.